During the short-term storage period of mobile power station, targeted measures should be taken to prevent equipment damage and prolong the use time. The following are key precautions and operational suggestions:
1、 Preparation before storing mobile power stations
Cleaning and Inspection
External cleaning: Clean the surface of the box from dirt and salt (with a focus on coastal areas), and prevent corrosion. Internal cleaning: Clean the engine compartment, radiator, intake and exhaust ports, and other debris to avoid blockage. Functional testing: Start the device and run it for 10-15 minutes. After confirming that there are no abnormalities, stop the machine.
Fuel system treatment
Emptying or adding stabilizers:
If stored for more than one month, it is recommended to empty the fuel tank to prevent fuel deterioration and blockage of the fuel circuit. If you want to keep the fuel, you need to add a fuel stabilizer and run the engine for 5 minutes to circulate the additive.
Lubrication and anti-corrosion
Change engine oil: Replace old oil with new oil to reduce the corrosion of acidic substances on the engine.
Apply rust inhibitor: Spray rust preventive oil on exposed metal parts.
2、 Requirements for Storage Environment of Mobile Power Stations
Dry and ventilated
Choose indoor or sheltered areas to avoid direct sunlight and rain. The ground should be flat and dry to prevent the box from getting damp or tilting. Temperature control: It is recommended to keep the storage temperature between -15 ℃ and 40 ℃. In extreme low temperatures, the cooling water should be drained. In winter, insulation covers or heating belts can be used to prevent freezing and cracking.
fire safety
The storage area should be kept away from flammable materials and equipped with fire extinguishers. It is prohibited to store dangerous goods such as batteries and chemicals inside the box.
3、 Protective measures for mobile power station equipment
Battery Maintenance
Disconnect the negative pole: to prevent battery self discharge from causing power loss. Regular charging: Use a dedicated charger every 2 weeks to replenish power to over 50%.
Tire and suspension system
If it is a trailer type power station, cushion blocks need to be used to support the vehicle body to avoid long-term deformation of the tires under pressure. Move vehicles several meters per month to prevent tire adhesion to the ground.
Air intake and exhaust port protection
Seal the intake and exhaust ports with dust covers or plastic sheeting to prevent dust and insects from entering. Regularly check the sealing status to avoid damage.
4、 Regular inspection and maintenance of mobile power stations
Inspection cycle
Weekly: Appearance inspection (rust, damage), battery voltage measurement. Monthly: Start the equipment and run it without load for 10 minutes, checking parameters such as oil pressure and water temperature.
exception handling
Discovering a fuel leak: Immediately clean and check the sealing of the fuel pipes and joints. Battery voltage below 12V: Charge or replace in a timely manner.
5、 Response to special scenarios of mobile power stations
Coastal/high humidity areas
Add dehumidification equipment to prevent electrical components from getting damp. Use anti salt spray coating to protect metal components.
Sandstorm/dusty environment
Seal all openings and increase the frequency of air filter cleaning.
6、 Preparation for restarting after storing the mobile power station
Comprehensive inspection
Check the oil and coolant levels, replenish or replace deteriorated fluids. Clean the air filter and fuel filter.
test run
Run without load for 30 minutes and observe for any abnormal noise, oil leakage, or vibration. Before load testing, gradually increase the power to avoid sudden overload.
Short term storage of mobile power stations requires special attention to moisture prevention, rust prevention, corrosion prevention, and battery maintenance. Standardized operation can significantly reduce equipment failure rates. It is recommended to establish inspection records during storage to ensure that the equipment is in good condition when restarted.
More Mobile Power Station information:http://www.fdjjg.com/
